Removing these has eliminated some calibration issues in the past. The covers are black plastic rectangles at the top and bottom of the device, which can be removed with a pushpin. Additionally, try removing the microphone covers on the right side of the MimioTeach bar. If you can calibrate it there, you’ll know that the problem is an environmental issue. If you are unable to cover the sensors, try using the MimioTeach device in another classroom without these types of lights. Some of these sensors operate on a similar frequency as the MimioTeach device and can cause interference. Are there motion-activated lights in your classroom? If so, covering up the sensors may resolve the issue. If the device is not mounted in this location or if there is physical interference, the calibration will be off. There cannot be any objects between the bar and the stylus. The MimioTeach bar needs to be positioned on the left side of the whiteboard, centered between the top and bottom of the projected image. There is a blinking green light on the front of the MimioTeach bar and the device will not work.If you still can’t get the unit to connect, contact for additional troubleshooting. If you have multiple sources of power, remove the batteries, power the MimioTeach device using the wall adapter, and then go through the pairing process again. Having multiple sources of power (batteries and wall adapter) can cause connection issues. If you are unable to get the MimioTeach device to pair to the MimioHub receiver, make sure that there are no batteries inside the unit. The light on the device will now turn green and the device will function properly. Once that is done, the MimioTeach device should show up under Classroom Devices as “Available.” Select it and click the “Connect” button in the bottom right corner of the window. Keep this window open and then hold down the amber light on the front of the MimioTeach bar for approximately 20 seconds. If the MimioHub receiver is working, it will show “MimioHub – Connected” in the list. On a Mac, go to Notebook > Preferences > Classroom Devices. On a PC, go to Tools > Settings > Classroom Devices. On your computer, make sure the MimioHub receiver is inserted into a USB port and that it’s solid green.
If your MimioTeach bar is displaying a solid amber light, it means that it is not paired to the MimioHub™ wireless receiver.
0 kommentar(er)
